BioStar
How to add Vehicle Transponder
Select User Select Card for Vehicles the Card Type should be Wiegand Card Data Format will be 26 bit SIA Standard- H10301 for Registration Option, You will enter the code Manually, Select Enroll, and the Apply Take a look at the Vehicle Transponder ...
How to enroll a new keyfob using card reader
Select the User you want to add a Key fob for Select Card Select Card Type Registration Option would be Register by Card Reader Select Device you want to use Then you will Read Card and scan the key fob using the device you selected Once scanned the ...
Troubleshooting Suprema Xpass 2 Readers
Suprema Xpass 2 readers work hand-in-hand with BioStar 2 to control door and gate access. Since these readers are network-based and powered by PoE (Power over Ethernet), issues are usually related to power, cabling, or door hardware. This guide will ...
Troubleshooting Suprema BioStar Remote Connection Issues
If you are having trouble connecting to BioStar 2, follow the steps below to identify and resolve the issue. How BioStar Works Host Computer: BioStar runs on a dedicated host computer installed by HDSS. This PC is intended to run only BioStar ...
Adding a user on BioStar 2
To add a user in BioStar 2, a security and access control software used for managing biometric devices and access rights, follow these step-by-step instructions. Please note that these steps are based on a general understanding of BioStar 2 and the ...
Remove or Revoke a User on BioStar2
To remove or revoke a user in BioStar 2, follow these step-by-step instructions. Keep in mind that removing a user will typically delete their profile and access rights from the system, whereas revoking a user may simply disable their access ...