How to add Vehicle Transponder

Select User

Select Card

for Vehicles the Card Type should be Wiegand

Card Data Format will be 26 bit SIA Standard- H10301

for Registration Option, You will enter the code Manually, Select Enroll, and the Apply

Take a look at the Vehicle Transponder stickers for the Facility Code and Card ID

• Related Articles

• How to enroll a new keyfob using card reader

  Select the User you want to add a Key fob for Select Card Select Card Type Registration Option would be Register by Card Reader Select Device you want to use Then you will Read Card and scan the key fob using the device you selected Once scanned the ...

• Troubleshooting Suprema Xpass 2 Readers

  Suprema Xpass 2 readers work hand-in-hand with BioStar 2 to control door and gate access. Since these readers are network-based and powered by PoE (Power over Ethernet), issues are usually related to power, cabling, or door hardware. This guide will ...

• Adding a user on BioStar 2

  To add a user in BioStar 2, a security and access control software used for managing biometric devices and access rights, follow these step-by-step instructions. Please note that these steps are based on a general understanding of BioStar 2 and the ...