How to enroll a new keyfob using card reader

Select the User you want to add a Key fob for

Select Card

Select Card Type

Registration Option would be Register by Card Reader

Select Device you want to use

Then you will Read Card and scan the key fob using the device you selected

Once scanned the number will pop up on Card ID

Enroll the card and then Apply to save the card on file 

• Related Articles

• Adding a New User (card/fob)

  From the top menu, go to Access → Users. Click Create (or Add) to open a new user form. Enter the person’s First Name and Last Name. Adding a unit number or note in the name helps you find them later (e.g., “Smith – Unit 204”). Scroll to the Cards ...

• Setting up Airfob on an iPhone

  Invitation 1) On your mobile phone, check your email for an invitation from Airfob 2) Review the information and tap " Download Mobile Access Card" Download Airfob 3) Tap "Open" If you do not have the app downloaded, you will be navigated to download ...

• How to add Vehicle Transponder

  Select User Select Card for Vehicles the Card Type should be Wiegand Card Data Format will be 26 bit SIA Standard- H10301 for Registration Option, You will enter the code Manually, Select Enroll, and the Apply Take a look at the Vehicle Transponder ...

• Adding a user on BioStar 2

  To add a user in BioStar 2, a security and access control software used for managing biometric devices and access rights, follow these step-by-step instructions. Please note that these steps are based on a general understanding of BioStar 2 and the ...

• Troubleshooting Suprema Xpass 2 Readers

  Suprema Xpass 2 readers work hand-in-hand with BioStar 2 to control door and gate access. Since these readers are network-based and powered by PoE (Power over Ethernet), issues are usually related to power, cabling, or door hardware. This guide will ...