How to Reset and Sync a TP-Link WiFi Extender

How to Reset and Sync a TP-Link WiFi Extender

Step 1: Factory Reset the Extender

  1. Locate the reset button on the bottom of the TP-Link WiFi extender.

  2. Use a paper clip or similar tool to press and hold the reset button.

  3. Hold it for 15 seconds, then release.

  4. Wait up to 1 minute for the extender to complete the factory reset process.

Step 2: Activate WPS on Your Router

  1. On your WiFi router/gateway, locate the WPS button.

    • It may be labeled “WPS” or display an icon of two arrows forming a circle.

  2. Press and hold the WPS button for 5 seconds, then release.

Step 3: Sync the Extender

  1. Go back to the TP-Link WiFi extender.

  2. On the top of the extender, press and hold the WiFi button for 5 seconds, then release.

  3. Wait up to 2 minutes for the devices to sync.

  4. You’ll know the sync is complete when you see 4 solid blue LED lights on top of the TP-Link extender.

  5. View the video for guidance



If Your Router Does Not Have a WPS Button

If your router does not have a WPS button, you can still connect the TP-Link WiFi extender using the TP-Link Tether app or a web browser setup.

Method 2 - Using a Web Browser

  1. Connect to the Extender: On your smartphone connect to the extender's default Wi-Fi network (e.g., TP-LINK_Extender_XXXXXX).

  2. Access the Setup Page: Open a web browser (safari or chrome) and enter http://tplinkrepeater.net or http://192.168.0.254 into the address bar. Create a new login password for secure management.

  3. Configure the Extender: Follow the on-screen instructions to select your existing Wi-Fi network and enter its password. Once configured, the RE LED should turn solid on.

  4. View the video for guidance


Method 3: Using the TP-Link Tether App

  1. Download the App: Get the TP-Link Tether app from the Apple App Store or Google Play Store.

  2. Connect to the Extender: Ensure your smartphone is connected to the extender's default Wi-Fi network.

  3. Launch the App: Open the Tether app, select your extender, and follow the in-app instructions to complete the setup.

  4. View the video for guidance


    • Related Articles

    • How to Reset Your Password on the UNV Link App

      How to Reset Your Password on the UNV Link App Forgot your password? No problem! Resetting your password on the UNV Link app is simple. Just follow the steps below: Step-by-Step Instructions: Open the UNV Link App On the main screen, tap "Forgot ...

    • Reset Your Recorder's Password Through the Lorex App

      Reset Your Recorder's Password Through the Lorex App Note: Only the device owner has the authority to change the recorder's password; shared users do not possess this capability. Launch the Lorex app and log in to your account. Tap above your ...

    • How to View Playback in the UNV-Link App

      Use the UNV-Link app to easily review recorded footage from your Uniview recorder or camera. Step-by-Step Instructions 1. Open the UNV-Link App Launch the app and log in (if required). 2. Go to Live View From the Home screen, tap on a camera to open ...

    • Reset Your Recorder's Password Through Your Recorder (Old Local UI)

      Reset Your Recorder's Password Through Your Recorder (Old Local UI) Note: Only the device owner has the authority to change the recorder's password; shared users do not possess this capability. Launch the Lorex app and log in to your account. Tap ...

    • Reset Your Recorder's Password Through Your Recorder (New Local UI)

      Note: Only the device owner has the authority to change the recorder's password; shared users do not possess this capability. Launch the Lorex app and log in to your account. Tap above your recorder's thumbnail. Tap the Device Settings icon (•••) at ...