Connecting to Wifi

Connecting to Wifi

Connecting to Wi-Fi Using WPS Mode

Step-By-Step Instructions:
  1. Hold the reset button for 3 seconds until the LED flashes blue.

    2. V724 Outdoor Camera

  2. Press and release the router's WPS button or enable WPS through the router's settings.
  3. The LED on the camera may turn red during this step. Wait up to 2 minutes for the LED to flash then turn solid green to confirm a successful connection.
Video Instructions:

Note: If WPS mode fails, try Access Point mode.


Connecting to Wi-Fi Using AP Mode

Step-By-Step Instructions:
  1. Hold the reset button for 6 seconds until the LED flashes white.

    2. V724 Outdoor Camera

  2. Open your smartphone's Wi-Fi settings and look for ADC-V724 (xx:xx:xx), then press Connect.
  3. Open a web browser and go to http://v724install/. Then click Scan to search for Wi-Fi networks.
  4. Select your Wi-Fi network, scroll up and enter your Wi-Fi credentials, press Submit, then OK.
  5. The camera LED will turn green if successful, or red if there is a failure.
Video Instructions:

    • Related Articles

    • Connecting VDB770 to Wifi

      AP Mode (recommended) The camera is in Access Point (AP) mode when the button LED is blinking white. If necessary, access AP mode by holding down the doorbell button for 45-50s and release when the LED turns to blinking white. Using a Wi-Fi-capable ...

    • Connecting VDB750 to Wifi

      AP Mode (recommended) Verify that device boots (flashing red LED) to AP mode (flashing white LED). If the LED is not white after two minutes, hold down the doorbell button and release when the LED begins to blink white (about 35 seconds). On an ...

    • Updating WiFi

      Doorbell Camera is Flashing Orange If your Doorbell Camera recently stopped working and the LED is showing an Orange rapid double flash, your Doorbell Camera is having trouble connecting to your Wi-Fi network. There are a few reasons that your ...

    • How to Program Wi-Fi on the IQ Panel 4

      Summary: This guide provides step-by-step instructions to connect your Qolsys IQ Panel 4 to a Wi-Fi network by manually selecting your network and entering the password. Connecting to Wi-Fi enables features like software updates, communication with ...

    • 2GIG GC2e User Manual 📖

      Need detailed guidance for your GC2e control panel? We’ve attached the official 2GIG GC2e User Manual to help with setup, operation, and troubleshooting. ? Download the manual below for step-by-step instructions, feature details, and diagrams.